- Sunstrip size 140 x 25cm.
- Available in a wide range of colours.
Option for cut out for sensor, this cut out is set as a sqaure depending on how much open area you require for your sensors to still function. Sizing will be 5cm wide by 5cm high but narrower at the top this is the same for 7cm variation
Before fitting please ensure you have read the fitting instructions provided in the additional info section.
Universal plain sunstrip
£9.50Price
Colour
Sunstrip Fitting Guide.
- Do not apply in cold or hot temperatures this will affect the performance of the adhesive and vinyl.
- Thoroughly clean the windscreen to remove all dirt, we recommend using soapy water, once clean completely dry the surface.
- measure down each side of the windscreen and apply masking tape on the A pillars at the appropriate height and so each side is level.
- Flip the sunstrip upside down and slowly remove the backing paper leaving the vinyl on the flat surface, while removing the paper spray a mist of soapy water onto the sticky side of the vinyl and onto the top of the windscreen.
- Apply the sunstrip to the windscreen leaving a equal amount of excess overhanging on each side which will allow for movement if it needs adjusting while trying to level it out.
- Once you are happy with the placement being to squeegee out the excess water and air starting from the middle outwards pushing into any corners or edges.
- Trim off any excess vinyl with a sharp blade and allow a drying time of 12 hours minimum, any decals can be applied to the strips after a minimum of 3 hours.