Universal vehicle stripes come in 6 designs and start off at 150cm. Order additional metres if require in a range of colours and finishes.
- Stripe 001: Classic racing stripe, each strip is 20cm wide with a gap in the middle of 10cm totalling 50cm width
- Stripe 002: Solid block 150cm x 25cm width
- Stripe 003: Large & thin, larger stripe is 15cm with 5cm gap and then a 5cm stripe. Heigth width 25cm
- Stripe 004: Dual stripe with thinner stripe within, large stripe is 10cm with 2.5cm gap and then 5cm stripe, 2.5cm gap in the middle and then 5cm strip, 2.5cm gap, 10cm stripe. Total width 47.5cm.
- Stripe 005: Outer thin stripe, 2.5cm with a 1cm gap then 10cm stripe. Middle gap is 5cm followed by 10cm stripe, 1cm gap and a 2.5cm stripe. Total width 32cm.
- Stripe 006: Thin & large, 5cm thin strip then 2.5cm gap followed by 15cm stripe and repeat of 2.5cm and 5cm stripe. Total width 25cm.
We have set the length in mutli metres to allow for all vehicles please note lengths of 250cm and more will be cut into 250cm sections.
Vehicle Stripes
£12.50Price
Colour
Fitting Guide.
- Do not apply in cold or hot temperatures this will affect the performance of the adhesive and vinyl.
- Thoroughly clean the surface to remove all dirt, we recommend using soapy water, once clean completely dry the surface.
- Prepare the sticker for application by firmly rubbing a squeegee across the sticker. This ensures the vinyl is stuck to the transfer tape and removes any air bubbles which may have occurred in postage.
- Flip the decal so it is the wrong side up and peel the backing card away from the transfer tape.
- Place the decal onto the surface and rub it in place firmly with a squeegee.
- Slowly peel the backing paper off at a 45 degree angle.